@jeffandersen Hi Jeff, that is a very good point. Adding Bagel's diameter of 8cm to the measurement is a feature we can easily throw into our product firmware. We will add that feature before we ship our products to backers in October. Thanks!
Report
I think in it's current conception it's a product aimed at the DIY and not the professional which chooses either the cheap, simple, durable or the very expensive, complex, automated, topographic 3D measurement device.
@abetancort Hi Alfonso, you are right. We were focused more on the DIY market when we first decided to work on this model. We will be developing more professional models in the future, and I hope you'll like those. Thanks!
Report
Awesome idea but precision of 99.5% is not good enough. When measuring a meter, the result could be off by as much as half a centimeter.
@xpekeler Hi Christian, yeah we know we need more work to lower that error margin. We are definitely going work more on that before we ship it to our KS backers in Oct/Nov. Thanks!
Report
How does bagel perform when dropped? What height can it be dropped from and survive? Tapes are often airborne when working from scaffold. Will I have to replace the Bagel the first time it's dropped?
@a12rj Hi Anthony, thank you for some great questions regarding durability. We've used polycarbonate for the casing of Bagel smart tape measure, which makes it much more durable than it looks. We'll have videos of us doing drop tests, running over with a car, etc, so please stay tuned!
Report
Dying to get me one of these...
Hard to say how handy its going to be in construction sites. the different terrains and the battery life would be a huge parameter in these cased IMO.
Looks like a great promise. good luck guys!
@ishaiankri Thanks Ishai. If you are concerned about durability, we are going to upload a drop test video and also that of running over the device with a car. It will be up on our KS updates page within a week! Thanks!
Report
This was so clearly developed by people who don't use tape measures. The body width is a fraction that doesn't easily compute. You can't measure inner dimensions (e.g. of a cabinet). The lack of markings on the string means you have to hold the tape measure right at the edge of what you want to measure, and then be at an angle where you can read the screen. It doesn't appear to support fractions, which are the de facto way of communicating imperial measurements. What an immense amount of effort for an inferior product from the "put a laser on it" school of product design.
@coreyward Hi Corey, as of yesterday, we added the inside/outside measurement into the device's firmware. The body size is in fraction for inches, but not for metric, and stands at exactly 80mm. Also, inches in fraction is supported on our mobile app. Thanks
Replies
manifoldco
Bagel
Bagel
Bagel
Bagel
Bagel
Bagel
businesscards.io