WatchLog - Your watch collection, every watch's drift and a timegrapher

WatchLog keeps your mechanical watch collection in one place and tracks the accuracy of every watch in it. Add each watch, drawn in 3D, and see its drift at a glance. Tap as the seconds hand hits the mark: the reading is stamped with atomic time and charted in seconds per day against COSC, METAS and 18 other standards. The built-in timegrapher reads rate, beat error and amplitude through the microphone, no extra hardware. iPhone, iPad and Mac. Free for three watches, no account, no ads.

Add a comment

Replies

Best

Hi Product Hunt 👋 I'm Mathieu, the indie developer behind WatchLog.

A mechanical watch gains or loses a few seconds every day, and how many says a lot about its health. I wanted one place for every watch I own, with how each of them is running, and the answers a watchmaker gets from a timing machine. So I built WatchLog for iPhone, iPad and Mac.

What it does

  • Your collection. Every watch you own in one place, drawn in 3D, each showing how far off it is right now and how many seconds a day it gains or loses. Start from 259 well-known mechanical watches and change the case, bezel, dial, hands and strap until it's yours.
  • Drift, watch by watch. Tap the moment the seconds hand reaches the mark. The reading is stamped with atomic time, not the phone's clock, and a day later you have that watch's rate in seconds per day, then its average, its consistency, and the date it will be a full minute out.
  • Running to spec? Every reading is charted against the standard you pick: COSC, METAS and 18 more, down to everyday movement grades.
  • Timegrapher. Rest the watch against the microphone and read its rate, beat error and amplitude live, with a paper-tape trace and the waveform of each tick. No extra hardware.
  • Magnetism check. A watch that suddenly gains tens of seconds a day is usually magnetized, not broken. Pass it over the iPhone and the compass sensor tells you in fifteen seconds.

What it costs

Free for three watches, with the full log and timegrapher and no time limit. Pro ($4.99 a month or $49.99 a year, with a free week) adds unlimited watches, a side-by-side comparison of the collection, a guided positional test, a rest-position optimizer, full history, CSV export and audio clock calibration.

Privacy

Audio is analysed on the device and never recorded or uploaded. No account, no ads, no tracking.

What I'd love to hear

  • Which watch would you add first, and what would you want to know about it?
  • If you own a timegrapher: how do WatchLog's numbers compare with your machine? That is the feedback I need most.
  • Anything confusing in the first five minutes.

Thanks for taking a look. I'll be here all day.