Launching today

ScanToBIM-CAD
Upload a point cloud, get a Revit, IFC and DXF model
2 followers
Upload a point cloud, get a Revit, IFC and DXF model
2 followers
Upload a laser scan of a building (E57, LAS, LAZ or PLY) in the browser and see a quote measured from your own scan. Order, and you get a native Revit model, an IFC and a DXF drawing set: floor plans, elevations and sections. All floors, nothing to install.







Free Options
Launch Team

AWS Activate CreditsCredits that fuel your startup’s next milestone
Promoted
Hi Product Hunt, I'm Alex, the maker.
Turning a laser scan of a building into drawings is usually hand work: someone traces walls over the point cloud for hours, or the scan goes to a modelling service and comes back days or weeks later. ScanToBIM-CAD does that modelling automatically.
What it does: you upload a point cloud (E57, LAS, LAZ or PLY) in the browser. Within minutes you can view it, and you get a quote measured from the scan itself, floor by floor. If you order, you get a native Revit model, an IFC, and a DXF drawing set with a dimensioned floor plan for every storey, four elevations and four sections. All floors come back in one model from one upload. It is usually ready within a few hours, and you check the model inside your own scan before you download.
What the model holds: a level for every storey, walls at their measured thickness (straight, diagonal and curved), floors, doors, windows, stairs, columns, ceilings and roofs, inside and out. Walls typically sit about a centimetre from the scan.
Who it is for: surveyors, architects, engineers and scanning firms who have a point cloud of a building and need it as BIM and drawings.
What it costs, in type: uploading, viewing and drawing your own model are free, with no card. The AI model is priced per scan from the size of the building. You see the price before you order and you are charged only when the model is delivered.
What I'd like feedback on: if you work with scans, is the quote step clear, and which output do you need first: the Revit model, the IFC or the 2D drawings? If you don't have a scan at hand, the home page shows five real scans next to their models.