No reviews yetBe the first to leave a review for flair
@dandroid88 How does this work on vents that are on the floor? Seems like it may be better create a unit that fits inside the duct near the vent cover. Instead of attaching to the vent cover.
@McCroden We are planning to simply build floor models that just replace your existing floor vents. It needs to be flush and strong so that you can't put a chair leg through it.
Report
@dandroid88 Do you think it might be simpler to use existing vent cover and make something go on the inside of the vent? I just know a lot of people that choose floor vent covers to match the floor material. Ex: wood floors have matching wood vent covers.
@McCroden Thats an interesting idea and totally have seen decorative floor vent covers. We are mostly focusing on the ceiling models for the initial push so we will keep this suggestion in mind no doubt. Thanks for the feedback, we will take as much input as possible!
Report
@dandroid88 For sure. One last thing: My dad is a carpenter. Any house that we have built only ever had ceiling air vents in basements. Maybe it's just a midwest thing, but may be worth figuring out what the market actually is for that. $0.02
@McCroden absolutely. We have done a fair amount of surveying and collecting stats but without a doubt its a mixed bag and its geography dependent. Our findings are that generally floor vents are more common in places where heating is the priority and ceiling vents are quite common in both warm and cold places.
Isn't Nest, uh, Nest for HVAC? This doesn't seem differentiated, perhaps just more robust zone support (for those lucky enough to have multiple zones)?
@ryan my initial thought verbatim
@dandroid88 If you save more energy, it seems like you are making a biz case for this over Nest? Are there any downsides to the UX? Will this cost more?
@EAWharton There is some case for this over nest but really we see it as a compliment to nest. They expose an API to your furnace, AC and blower motor. We build on that for more significant energy efficiency gains.
I'm sure you could come up with downsides regarding UX but we could also come up with upsides. Lower energy bills and more granular control seem like a better experience to me. Having a single temp sensor in a hallway is a pretty lacking UX for a complex structure. We have a responsive web UI will build native Apps on top of our APIs. Lastly, we are using some cool tricks for occupancy detection hence after you set your desired temperature for rooms, it should just work in the background.
@ryan its actually quite different, and in fact, complimentary for Nest owners. Nest only has at most 5% energy improvement. We can improve that multiplicatively. We are calling it 'microzoing'. I use it in my small apartment simply to ignore my bedroom during the day and ignore the kitchen/living room while sleeping.
@dandroid88 product page is very opaque. How would you implement "microzones" without a multi-zone HVAC system?
Report
@ryan The video on the page shows a vent cover magnetically attached to the actual vent cover. The flair cover will, I'm assuming, get a signal from a central unit to close or open the vents. Thereby creating different zones.
@ryan I would suggest thinking about it more as dynamic balancing. Essentially, we are routing the air by biasing vents in occupied rooms and by temperature gradients. All registers already have a close/open mechanism. We are simply automating the open/close/adjust to waste less and ensure satisfactory localized climate control. It is also respectful of single speed blower motors (not closing too many at once as indicated by pressure sensors) and self optimizes by tracking system ontime and minimizing it while satisfying comfort requirements.
I love the idea. Quick question: we only have two zones in our house, and for awhile we closed all the vents in the rooms we didn't need to heat/cool. But our HVAC guy told us that closing vents can be harmful to the system, since it creates vortexes of air that can reduce overall efficiency. I have no idea if that is true or not. But is that a possible downside to using flair to close vents?
@jfrankel13 We are tracking the on-time of the system in order to measure system efficiency. The idea is that on-time is a cost function (in the machine learning world) which can be optimized. Effectively, we can make configuration adjustments and figure out how to minimize on time while satisfying your temperature requirements. We are also being careful to play nice with older systems. For instance, we have pressure sensors that can tell when the system pressure is too high and hence too many vents are closed at any given time. We don't want to stress your system, in fact, we want it to run less hence make it last longer while saving you money.
Lastly, and I made a similar comment above, think of it as dynamic balancing rather than strict zoning in the traditional sense. All registers are made to open and close with good reason. We are just automating this process for comfort and efficiency.
@adamsigel yes, a similar approach. room by room (even subroom in some cases!) although we have a few tricks up our sleeves that makes our product a better choice.
Report
@dandroid88 Yeah, the battery claim is very impressive. Also curious to know how you handle onboarding/initial device setup (presumably you have to get everything on wifi?). That always seems like a UX hurdle for connected devices.
@adamsigel If you are familiar with how chrome does it, thats what we are thinking for wifi only setups. Ethernet is a bit easier. FYI, we have a base station(s) which is coordinating the system.
As far as each vent we currently have them self register with the base station and then you simply assign them to user created rooms.
Agreed that it is a tripping point for a lot of connected devices.
Report
Seems more like ecovent systems based on the room-by-room vent approach.
Report
Looking interesting. Two questions: 1: HomeKit support coming? 2: Able to change from F to C?
The Pitch
The Pitch
The Pitch
Architect 7.0 (Chupacabra)
Strikingly
The Pitch
The Pitch
Architect 7.0 (Chupacabra)
Architect 7.0 (Chupacabra)
The Pitch
Nucleus
The Pitch
The Pitch
The Pitch